Bell
Bell MAG-10 Rally Carbon Helmet
Bell MAG-10 Rally Carbon Helmet
SKU:1245301
SIZE COMPARISON CHART
| Centimeters | Generic Sizes | Hat Size |
|---|---|---|
| 51 | 4XS | 6 3/8 |
| 52 | 3XS | 6 1/2 – 6 5/8 |
| 53 | ||
| 54 | XXS | 6 3/4 – 6 7/8 |
| 55 | XS | 7 |
| 56 | ||
| 57 | SML | 7 1/8 – 7 1/4 |
| 58 | MED | 7 1/4 – 7 3/8 |
| 59 | ||
| 60 | LRG | 7 1/2 |
| 61 | XLG | 7 5/8 – 7 3/4 |
| 62 | ||
| 63 | XXL | 7 7/8 – 8 |
| 64 | ||
| 65 | 3XL | 8 1/8 – 8 1/4 |
| 66 | ||
| 67 | 4XL | 8 3/8 – 8 1/2 |
| 68 |
Sizing HP – Carbon – Pro
| Centimeters | Generic Sizes | Hat Size |
|---|---|---|
| 54 | XXS | 6 3/4 – 6 7/8 |
| 55 | XS | 7 |
| 56 | ||
| 57 | SML | 7 1/8 – 7 1/4 |
| 58 | MED | 7 1/4 – 7 3/8 |
| 59 | ||
| 60 | LRG | 7 1/2 |
| 61 | XLG | 7 5/8 – 7 3/4 |
| 61+ |
Measurements
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.
A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.
Couldn't load pickup availability
Description
The MAG-10 Rally Carbon is based on the HP10 Rally and delivers a sleek, modern design in a sophisticated, ultra-lightweight open-face premium helmet. Built with a carbon composite shell, it features a Fast Removable Half Chin Bar (HCB), adjustable carbon fiber peak, and an integrated adjustable sunscreen. With a highly comfortable professional fit and outstanding sound insulation, it has become the preferred choice for rally drivers and co-drivers seeking high-end performance and comfort.
Developed from the extensive Research & Development program of the HP10, the MAG-10 Rally Carbon sets new benchmarks in the premium helmet category. It combines advanced ZeroNoise® electronics with high-power speakers and a noise-cancelling microphone to ensure excellent communication and sound clarity. Designed for safety, comfort, and efficiency, this helmet represents the next level in rally helmet technology.
